+86 188 1666 3689 (WhatsApp)
PRODUCTS
MOTCRANE PRODUCTS

Rubber Tyred Gantry Crane

MOTCRANE rubber tyred gantry cranes are built for flexible heavy-load handling in industrial yards, steel structure sites, precast yards, equipment manufacturing facilities, shipyards, and containerized equipment handling areas.

The crane travels on rubber tyres without fixed rail tracks, making it suitable for moving large components, machinery, steel structures, modules, energy storage cabinets, containerized units, and heavy cargo between different working areas. Each solution is customized according to the load, span, lifting height, ground condition, steering mode, and operating route.

Depending on the application, single- or double-girder structures can be configured with electric wire rope hoists or hydraulic lifting systems. The longitudinal arrangement and lifting-point positions can also be customized for long or oversized industrial loads.

Contact Us
 

Common Rubber Tyred Gantry Crane Solutions

MOTCRANE does not simply recommend standard mobile gantry crane models. Each rubber tyred gantry crane solution is configured according to the customer’s actual handling process, including equipment structure, wheel arrangement, steering method, control system, and power supply. The following are common solutions for industrial applications.
Single girder electric rubber tyred gantry crane with electric hoist for industrial material handling

Single Girder Electric Rubber Tyred Gantry Crane

This type uses a single-girder structure with two rigid support legs. Lifting is handled by an electric hoist, while both travel and steering are driven by gear motors.

It is a practical solution for light to medium-duty material handling in standard industrial yards, workshops, and production areas.

Single girder hydraulic rubber tyred gantry crane with hydraulic lifting and wheel drive systems

Single Girder Hydraulic Rubber Tyred Gantry Crane

This type uses a single-girder structure with two rigid support legs. Hoisting is powered by a hydraulic winch, while travel is driven by hydraulic motors and steering is controlled by hydraulic cylinders.

Compared with the electric type, it is better suited for heavy-load handling, low-speed movement, and applications where stable control is required.

Height-adjustable single girder rubber tyred gantry crane with hydraulic leg adjustment system

Height-Adjustable Single Girder Rubber Tyred Gantry Crane

This type is developed from the hydraulic gantry concept, but replaces track-plate travel with a tyre-mounted running system.

It uses a single-girder structure with two rigid support legs, and the height can be adjusted by single-stage or multi-stage hydraulic cylinders to suit different cargo heights, assembly stations, and site clearance requirements.

Multi-Point Lifting Rubber Tyred Gantry Crane

This type is usually designed with a four-leg structure and rigid support legs. It is suitable for long or oversized cargo that requires multiple lifting points, such as long steel structures, precast beams, modules, and large frames.

Depending on the application, the crane can be designed with a fixed height or equipped with hydraulic cylinders for height adjustment. 

For long industrial components, the lifting-point spacing and longitudinal structure can be customized to suit the load. If your main application involves frequent pick-and-carry handling of containers or energy storage cabinets using a dedicated four-point lifting attachment, our Straddle Carrier may be a more suitable option.

Multi-point lifting rubber tyred gantry crane with two electric wire rope hoists and four rubber tyres inside an industrial workshop
Rubber tyred mobile boat hoist with lifting slings for handling boats in a shipyard

Boat Travel Lift / Mobile Boat Hoist

A Boat Travel Lift, also known as a Mobile Boat Hoist, is mainly used for launching, hauling out, and moving yachts, boats, and workboats in marinas, boatyards, and ship repair facilities. It can transfer vessels between the water, maintenance areas, storage yards, and service stations.

Unlike standard industrial rubber tyred gantry cranes, Boat Travel Lifts are designed around boat handling requirements. They usually feature higher gantry clearance, specialized sling systems, multi-point synchronized lifting, and structural designs that help protect the hull during lifting and movement.

 

Rubber Tyre Travel, Steering & Control System

Rubber tyre travel and steering system for an industrial rubber tyred gantry crane

Rubber Tyre Travel & Steering System

  • Heavy-duty rubber tyres replace fixed rail tracks;
  • Travel can be driven by gear motors or hydraulic motors;
  • Steering can be motor-driven or controlled by hydraulic cylinders;
  • Straight travel, transverse travel, 90° steering, or customized steering modes can be designed according to site layout.

 

Hoisting power and electrical control system for a rubber tyred gantry crane

Hoisting, Power & Control System

  • Electric hoist or hydraulic winch can be selected according to load and working conditions;
  • Power options include cable reel, battery, diesel generator, or hybrid power system;
  • Remote control, cabin control, PLC control, and synchronized control can be configured;
  • Safety devices such as overload protection, limit switches, emergency stop, and alarms are available.

Related Crane Cases

Related blogs

Rubber Tyred Gantry Crane

Overview of Rubber Tyred Gantry Crane

 

A rubber-tired gantry crane is a mobile gantry lifting device that moves on rubber tires and does not require fixed tracks. It is suitable for industrial yards, steel structure sites, precast component yards, equipment manufacturing facilities, shipyards, energy storage cabinet production sites, and containerized equipment transfer areas.

Compared with rail-mounted gantry cranes, rubber tyred gantry cranes do not require fixed travel rails. However, the ground surface must be checked for wheel loads, bearing capacity, surface evenness, and slope before the equipment is selected.

We will configure a suitable tire-mounted gantry crane solution based on the customer’s site-specific requirements, including lifting capacity, span, lifting height, ground conditions, steering method, travel route, power supply, and actual material handling processes.

Safety functions are specified according to the selected crane configuration. These typically include overload protection, hoisting and travel limits, emergency stop systems, and audible or visual alarms. For applications requiring multiple lifting points or coordinated movement, synchronized control and anti-skew functions can be configured following engineering evaluation.

Travel and steering systems can be designed for straight travel, transverse movement, 90° steering, or other customized movement modes, depending on the tyre arrangement, drive system, and site conditions.

 

What Should You Confirm Before Selecting a Rubber Tyred Gantry Crane?

 

The most suitable configuration depends on more than lifting capacity. Before selecting a crane, confirm the maximum suspended load including lifting attachments, load dimensions, center of gravity, required lifting height, and travel distance.

Ground conditions are equally important. Provide information about the operating surface, slope, available turning space, door clearances, and whether the crane must travel while carrying a load.

You should also confirm the preferred power source, steering requirements, operating frequency, and whether independent or synchronized lifting points are needed.

MOTCRANE can use this information to review the crane structure, hoisting arrangement, wheel configuration, power system, and site requirements before preparing a project quotation.

 

Single Girder All-Electric Rubber Tyred Gantry Crane

 

  • Lifting Capacity: 5–20 tons
  • Span: Custom, up to 6 m
  • Lifting Height: Custom, up to 6 m
  • Hoisting Mechanism: Electric hoist
  • Travel and Steering System: Gear motor drive
  • Power Supply: Diesel generator, lithium battery, or external electrical supply, subject to the selected drive system and project requirements.
  • Applications: Suitable for light to medium-duty industrial material handling, such as equipment manufacturing workshops, steel structure sites, factory yards, and general production areas.

This all-electric rubber tyred gantry crane is a practical choice when the working route is relatively simple and a stable power supply is available on site. It offers straightforward operation, easy maintenance, and lower operating complexity for standard industrial handling tasks.

 

Single Girder Hydraulic Rubber Tyred Gantry Crane

 

  • Lifting Capacity: 5–100 tons
  • Span: Custom, up to 12 m
  • Lifting Height: Custom, up to 9 m
  • Hoisting Mechanism: Hydraulic winch
  • Travel and Steering System: Hydraulic motor drive and hydraulic cylinder steering
  • Power Supply: Diesel generator, lithium battery, or external electrical supply, subject to the selected drive system and project requirements.
  • Applications: Suitable for heavy loads, outdoor yards, low-speed handling, and projects requiring stable movement and stronger driving force.

Compared with all-electric solutions, the hydraulic rubber tyred gantry crane is better suited for low-speed, heavy-load applications. It is a suitable option when the cargo is heavy, the ground condition is more complex, or stable control is required during travel and positioning.

 

Height-Adjustable Single Girder Rubber Tyred Gantry Crane

 

  • Lifting Capacity: 5–100 tons
  • Span: Custom, up to 12 m
  • Lifting Height: Custom, up to 12 m
  • Height Adjustment: Single-stage or multi-stage hydraulic cylinders
  • Hoisting Mechanism: Electric hoist or hydraulic winch, according to the selected configuration
  • Travel and Steering System: Hydraulic motor drive, hydraulic cylinder steering, or gear motor drive
  • Power Supply: Diesel generator, lithium battery, or external electrical supply, subject to the selected drive system and project requirements.
  • Applications: Suitable for sites with height restrictions, factory entrances, cargo with different heights, and assembly stations with changing clearance requirements.

This height-adjustable rubber tyred gantry crane is designed for projects where the crane needs to work under different height conditions or move between indoor and outdoor areas. The hydraulic height-adjustment structure allows the crane to adapt to limited clearance areas while still providing flexible tyre-mounted movement on site.

 

Multi-Point Lifting Rubber Tyred Gantry Crane

 

  • Lifting Capacity: 5–100 tons
  • Span: Custom, up to 12 m
  • Lifting Height: Custom, up to 12 m
  • Hoisting Mechanism: Hydraulic cylinders, hydraulic winch, or electric hoist
  • Travel and Steering System: Hydraulic motor drive, hydraulic cylinder steering, or gear motor drive
  • Power Supply: Diesel generator, lithium battery, or external electrical supply, subject to the selected drive system and project requirements.
  • Applications: Suitable for long steel structures, precast beams, large frames, modular components, containerized equipment, and other oversized loads requiring multiple lifting points.

This type normally adopts a four-leg structure and can be configured with multiple lifting points to support long or oversized cargo. It can be designed with a fixed height or equipped with hydraulic cylinders for height adjustment. For long or oversized loads, the lifting-point arrangement should be determined according to the load geometry, center of gravity, and structural requirements. Where multiple hoists are used, load distribution and synchronized lifting control must be evaluated during the design stage.

 

Boat Travel Lift / Mobile Boat Hoist

 

  • Lifting Capacity: Typically 50–500 tons
  • Structure: High-clearance gantry structure for boat handling
  • Hoisting System: Sling lifting system with multi-point synchronized lifting
  • Travel and Steering System: Designed according to marina, boatyard, or shipyard layout
  • Applications: Suitable for launching, hauling out, transferring, and maintaining yachts, boats, and workboats in marinas, boatyards, yacht clubs, and ship repair facilities.

A Boat Travel Lift, also known as a Mobile Boat Hoist, is designed specifically for vessel handling. Compared with standard industrial rubber tyred gantry cranes, it focuses more on hull clearance, sling arrangement, synchronized lifting, and hull protection during movement. When the main handling object is a boat or yacht rather than industrial components, the Boat Travel Lift / Mobile Boat Hoist solution is the preferred choice.

For a project quotation, please share your load weight and dimensions, lifting height, working route, ground conditions, preferred power source, and any site drawings available.

Send Your Inquiry Today

© 2026 Jiangsu Morton Marine Technology Co., Ltd. All Rights Reserved.
en_USEnglish